University of Nevada, Las Vegas
Las Vegas (Nev.)
First page number:
Last page number:
The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.
Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.
The first subtask of this project involves using a CFD code (2-D simulation) such as STAR-CD to obtain averaged values of streamwise velocity, temperature, oxygen and corrosion product concentrations at a location deemed close to the walls of the LBE loop at more than one axial location along it. The oxygen and corrosion product inside the test loop will be simulated to participate in chemical reactions with the eutectic fluid as it diffuses through towards the walls. Details of the geometry of these loops will be obtained from scientists at LANL. These values will act as a set of starting boundary conditions to the second task.
The second subtask and the more important objective of this project is to use the information supplied by the first task as boundary conditions for the kinetic modeling of the corrosion process at the internal walls of the test loop. The outcome of the modeling will be fed back to the first subtask, and the steady state corrosion/precipitation in an oxygen controlled LBE system will be investigated through iterations. The information is hoped to shed some light on the likely locations for corrosion and precipitation along the axial length of parts of the test loop.
Chemical kinetics; Cavitation erosion; Computational fluid dynamics; Corrosion and anti-corrosives; Eutectic alloys; Hydrodynamics; Lead-bismuth alloys; Lead-bismuth eutectic; Metals — Oxidation; Oxygen; Steel — Corrosion
Chemical kinetics; Computational fluid dynamics; Steel--Corrosion
Materials Chemistry | Materials Science and Engineering | Metallurgy | Nuclear Engineering | Oil, Gas, and Energy
IN COPYRIGHT. For more information about this rights statement, please visit http://rightsstatements.org/vocab/InC/1.0/
Modeling Corrosion in Oxygen Controlled LBE Systems with Coupling of Chemical Kinetics and Hydrodynamics: Quarterly Progress Report August 16,2001- November 15, 2001.
Available at: https://digitalscholarship.unlv.edu/hrc_trp_sciences_materials/58