Readership Map
The readership map above shows the impact of this collection worldwide! To browse the collection, keep scrolling.
About the Collection
This collection contains faculty research from the UNLV Department of Mechanical Engineering. Records are organized by Year, Author, and Title. To view the entire collection of UNLV faculty research across all programs, visit the All Faculty Research collection.
Submissions from 2017
Modeling of a soft multiple-shape-memory ionic polymer-metal composite actuator, Q Shen, T Stalbaum, S Trabia, T Hwang, R Hunt, and K Kim
A Software Modeling Method for Integrating Functional and Security Design, Chee-Yang Song and Yoohwan Kim
A model framework for actuation and sensing of ionic polymer-metal composites: Prospective on frequency and shear response through simulation tools, T Stalbaum, Q Shen, and K J. Kim
Searching for a new ionomer for 3D printable ionic polymer-metal composites: Aquivion as a candidate, S Trabia, Z Olsen, and K J. Kim
Towards tasking humanoids for lift-and-carry non-rigid material, J C. Vaz, H Lee, Y Jun, and P Oh
Selected Papers from the 3rd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control (IWHT2015), Qiu-Wang Wang, Tzu-Chen Hung, Yitung Chen, Chao-An Lin, and Chi-Chuan Wang
Mobile 3D printing of rail track surface for rapid repair, Zhiyong Wang, Hualiang Teng, and Ershas Seyed
Design and manufacturing of implantable expanding cage, Z Y. Wang, B OToole, C V. Nunez, and D Ta
Two-Dimensional Chemical Etching Process Simulation for Printed Circuit Heat Exchanger Channels Based on Cellular Automata Model, Fei Xin, Yitung Chen, and Qiuwang Wang
Submissions from 2016
Octaflouridodirhenate(III) revisited: Solid-state preparation and quantum chemical calculations, Samundeeswari M. Balasekaran, Tanya K. Todorova, Chien Thang Pham, Thomas Hartmann, Ulrich Abram, Alfred P. Sattelberger, and Frederic Poineau
Evaluation of new materials for electron and hole transport layers in perovskite-based solar cells through SCAPS-1D simulations, Shubhra Bansal and P Aryal
Numerical investigation of mist/air impingement cooling on ribbed blade leading-edge surface, Q Bian, J Wang, Yi-tung Chen, Q Wang, and M Zeng
Analysis of Water Availability and Use for Solar Power Production in Nevada, Syeda S Bukhary, C Chen, and S Ahmad
Forced infiltration of silica beads into densely-packed glass fibre beds for thin composite laminates, Y Chan Kim, H Min, J Yu, S Y. Hong, M Wang, S H. Kim, J Suhr, Y K. Lee, Kwang Kim, and J D. Nam
Strategies for driving and egress for the vehicle of a humanoid robot in the drc finals 2015, H A. Dong, S S. Ju, Y Jun, K Sohn, G Jang, Paul Oh, and B K. Cho
Adaptive repetitive visual-servo control of a low-flying unmanned aerial vehicle with an uncalibrated high-flying camera, D Guo, W Yim, and K K. Leang
Combined photon–neutron radiography for nondestructive analysis of materials, Jessica Hartman and A Barzilov
DD and DT neutron generator yield measurements using EJ-299-33A detector, Jessica Hartman and A Barzilov
Remote sensing of neutron and gamma radiation using aerial unmanned autonomous system, Jessica Hartman, A Barzilov, and I Novikov
Thermodynamic and Microstructural Mechanisms in the Corrosion of Advanced Ceramic Technetium-bearing Waste Forms and Thermophysical Properties, Thomas Hartmann
Computational Study of Radiation Doses at the UNLV Accelerator Facility, Matthew Hodges, Alexander Barzilov, Yi-Tung Chen, and Daniel Lowe
Characterization of the Radiation Environment at the UNLV Accelerator Facility During Operation of the Varian M6 Linac, Matthew Hodges, Alexander P. Barzilov, Yi-tung Chen, and Daniel Lowe
Ultrafiltration using graphene oxide surface-embedded polysulfone membranes, Taeseon Hwang, J S. Oh, W Yim, J D. Nam, C Bae, H I. Kim, and K J. Kim
Study on electrochemical behavior of La(III) and preparation of Al-La intermetallic compound whiskers in chloride melt, D B. Ji, Y D. Yan, M L. Zhang, P Wang, X Yang, X Y. Jing, Y Xue, W Han, and Thomas Hartmann
Experimental and numerical analysis of structures with bolted joints subjected to low impact load - Part 1, K Karpanan and B O'Toole