Faculty research from the Mechanical Engineering department.
Submissions from 2008
Three-Dimensional Fluid Flow and Coupled Heat Transfer in Simplified Bipolar Plates, J. Wu, Jian H. Nie, and Y. Chen
Submissions from 2007
Evaluation of a Fuel Cell for Powering the Electrical Load of ICE Vehicles, Yahia Baghzouz, R. Hurt, and Robert F. Boehm
A Lattice Boltzmann Modeling of Corrosion Behavior and Oxygen Transport in the Natural Convection Lead-Alloy Flow, Huajun Chen, Yitung Chen, Hsuan-Tsung Hsieh, and Jinsuo Zhang
Developing Turbulent Forced Convection in Two-Dimensional Duct, Yi-Tung Chen, J. H. Nie, B. F. Armaly, Hsuan-Tsung Hsieh, and Robert F. Boehm
Modeling Permanent Mold Casting of Aluminum, Daniel P. Cook, Sachin S. Deshmukh, and David P. Carey
Thermal Tug-o-War: A Competitive, Hands-On Approach to Learning Basic Heat Exchanger Design, Daniel P. Cook and Sidney Lowe
Fluid Interaction of Segmented Ionic Polymer-Metal Composites Under Water, Deniz Dogruer, Joon S. Lee, Woosoon Yim, and Kwang J. Kim
Tensile Behavior of Nb7.5Ta for Heat-Exchanger Applications, Arindam Ghosh, Venkateswarlu Kondur, and Ajit K. Roy
Modeling of phase change material peak load shifting, Christopher K. Halford and Robert F. Boehm
Thermal transient flow rate sensor for high temperature liquid metal cooled nuclear reactor, Yingtao Jiang, Jian Ma, and Rohit Reddy Saddi
Modeling RedOx-Based Magnetohydrodynamics in Three-Dimensional Microfluidic Channels, Hussameddine S. Kabbani, Aihua Wang, Xiaobing Luo, and Shizhi Qian
Ionic Polymer-Metal Composites for Underwater Operation, Kwang J. Kim, Woosoon Yim, Jason W. Paquette, and Doyeon Kim
Motion Planning and Control of Artificial Muscle Actuated Underwater Vehicle Using Nonlinear Neural Oscillator, Joon S. Lee, Woosoon Yim, and Kwang J. Kim
Behavior Pattern and Parametric Characterization for Low Density Crushable Foams, Qunli Liu and Brendan J. O'Toole
Effect of Soft Honeycomb Core on Flexural Vibration of Sandwich Panel using Low Order and High Order Shear Deformation Models, Qunli Liu and Yi Zhao
Acoustic Emission (AE) Monitoring of Open Die and Closed Die Forging Processes of Al Alloy, C. K. Mukhopadhyay, S. Venugopal, T. Jayakumar, S. L. Mannan, Baldev Raj, B. Chatterji, R.. Srinivasan, V. Gopalakrishnan, G. Madhusudan, and R. S. Tripathi
A Tunable Vibration Isolator Using a Magnetorheological Elastomer With a Field Induced Modulus Bias, Saul Opie and Woosoon Yim
Effect of Microsphere and Binder Properties on State-Change Material Performance, Brendan J. O'Toole, S Rahman, and J Malpica
High Temperature Properties of a State-Change Material, Brendan J. O'Toole, S Rahman, and J Malpica
Application of an H-Adaptive Finite Element Model for Wind Energy Assessment in Nevada, Darrell Pepper and Xiuling Wang
An Advanced Numerical Model for Assessing 3-D Wind Fields, Darrell W. Pepper and Xiuling Wang
Transient Analysis of a Ceramic High Temperature Heat Exchanger and Chemical Decomposer, Valery Ponyavin, Taha M.R. Mohamed, Mohamed Trabia, Yitung Chen, and Anthony Hechanova
Transient Analysis of a Ceramic High Temperature Heat Exchanger and Chemical Decomposer, Valery Ponyavin, Taha Mohamed, Mohamed B. Trabia, Yitung Chen, and Anthony E. Hechanova
Transient analysis of aceramic high temperature heat exchanger and chemical decomposer, Valery Ponyavin, Mohamed B. Trabia, Taha Mohamed, Yi-tung Chen, and Anthony E. Hechanova
Diffusioosmotic Flows in Slit Nanochannels, Shizhi Qian, Biswajit Das, and Xiaobing Luo