Analysis of Ag(I) Biocide in Water Samples using Anodic Stripping Voltammetry with a Boron-doped Diamond Disk Electrode
Document Type
Article
Publication Date
5-14-2018
Publication Title
Analytical Chemistry
Abstract
The electroanalytical performance of a new commercial boron-doped diamond disk and a traditional nanocrystalline thin-film electrode were compared for the anodic stripping voltammetric determination of Ag(I). The diamond disk electrode is more flexible than the planar film as the former is compatible with most electrochemical cell designs including those incorporating magnetic stirring. Additionally, mechanical polishing and surface cleaning are simpler to execute. Differential pulse anodic stripping voltammetry (DPASV) was used to detect Ag(I) in standard solutions after optimization of the deposition potential, deposition time and scan rate. The optimized conditions were used to determine the concentration of Ag(I) in a NASA simulated potable water sample and a NIST standard reference solution. The electrochemical results were validated by ICP-OES measurements of the same solutions. The detection figures of merit for the disk electrode were as good or superior to those for the thin-film electrode. Detection limits were ≤5 μg L–1 (S/N = 3) for a 120 s deposition period, and response variabilities were <5% RSD. The polished disk electrode presented a more limited linear dynamic range presumably because of the reduced surface area available for metal phase formation. The concentrations of Ag(I) in the two water samples, as determined by DPASV, were in good agreement with the concentrations determined by ICP-OES.
Language
English
Repository Citation
Maldonado, V. Y.,
Espinoza-Motero, P. J.,
Rusinek, C. A.,
Swain, G. M.
(2018).
Analysis of Ag(I) Biocide in Water Samples using Anodic Stripping Voltammetry with a Boron-doped Diamond Disk Electrode.
Analytical Chemistry
http://dx.doi.org/10.1021/acs.analchem.7b04983