Readership Map
The readership map above shows the impact of this collection worldwide! To browse the collection, keep scrolling.
About the Collection
This collection contains faculty research from the UNLV Department of Mechanical Engineering. Records are organized by Year, Author, and Title. To view the entire collection of UNLV faculty research across all programs, visit the All Faculty Research collection.
Submissions from 2009
Modelling and Simulation of a Three-Link Spatial Manipulator with One Flexible Link, Kamal A.F. Moustafa, Mohamed Trabia, Mahmoud Emira, and S. Elnaggar
Modelling and Control of an Overhead Crane with a Variable Length Flexible Cable, Kamal A.F. Moustafa, Mohamed Trabia, and Mohamed I.S. Ismail
CFD Modeling and Experimental Validation of Sulfur Trioxide Decomposition in Bayonet Type Heat Exchanger and Chemical Decomposer for Different Packed Bed Designs, Vijaisri Nagarajan, Valery Ponyavin, Yitung Chen, Milton E. Vernon, Paul Pickard, and Anthony Hechanova
Measurement Techniques for Estimating Local and Total Duct Leakages in Residential Buildings, Nabil Nassif, Samir Moujaes, R. Gundavelli, D. Selvaraj, and Ken Teeters
Uniaxial Compression and Creep Behavior of a Porous State-Change Material at Ambient and Elevated Temperatures, S. M. Nelson, Brendan O'Toole, and Jagadeep Thota
Optimization of Carbon Fiber/Epoxy Tubes Loaded in Bending and Compression, S. M. Nelson, Jagadeep Thota, and Brendan O'Toole
Numerical and Experimental Study of Three-Dimensional Fluid Flow in the Bipolar Plate of a PEM Electrolysis Cell, J. H. Nie, Yi-Tung Chen, Steve Cohen, Blake D. Carter, and Robert F. Boehm
Numerical Modeling of Vapor Condensation During Cadmium Quenching Process in A Solar Receiver, J. H. Nie, Y. Chen, and Bunsen Wong
Effects of a Baffle on Separated Convection Flow Adjacent to Backward-Facing Step, Jian H. Nie, Yitung Chen, and Hsuan-Tsung Hsieh
Design and Control of a Real-Time Variable Stiffness Vibration Isolator, S. Opie and Woosoon Yim
Strain Analysis of a Composire Ankle-Foot Orthosis (AFO), Brendan J. O'Toole, Michelle Cameron Hawkins, Edward S. Neumann, and Mitchell Warner
Determination of J1C for Alloy 617 Using Single Specimen Compact Tension Specimen, J. Pal, M. H. Hasan, and A. K. Roy
Sulfonated Polyamide Based IPMCs, Il-Seok Park, Chulsung Bae, Tae Soo Jo, Justina Truong, Sang-Mun Kim, Kwang J. Kim, Woosoon Yim, and Joon-Soo Lee
An H-Adaptive Finite-Element Technique for Constructing 3D Wind Fields, Darrell Pepper and Xiuling Wang
Free-Surface Problems in Electrokinetic Micro- and Nanofluidics, Shizhi Qian, Sang W. Joo, Yingtao Jiang, and Marcos A. Cheney
Design of "Figure-8" Spherical Motion Flapping Wing for Miniature UAV, Zohaib Parvaiz Rehmat, Jesse Roll, Joon S. Lee, Woosoon Yim, and Mohamed Trabia
Fuel Assembly Self Shielding of Interrogation Neutrons in a Lead Slowing-Down Spectrometer, Catherine Romano, Yaron Danon, and Denis Beller
Creep Deformation of Alloys 617 and 276 at 750-950 °C, Ajit K. Roy, Muhammad Hasibul Hasan, and Joydeep Pal
The Effect of Silicon Content on Impact Toughness of T91 Grade Steels, Ajit K. Roy, Pankaj Kumar, and Debajyoti Maitra
Dynamic Strain Ageing of P91 Grade Steels of Varied Silicon Content, Ajit K. Roy, Pankaj Kumar, D. Maitra, and Debajyoti Maitra
Mechanism of Yield Strength Anomaly of Alloy 617, Ajit K. Roy and Vikram Marthandam
Temperature and Load Ratio Effects on Crack-Growth Behavior of Austenitic Superalloys, Ajit K. Roy, Joydeep Pal, and Muhammad H. Hasan
Performance Prediction of Solar Absorption Cooling Systems Assisted by Gas Heaters, Suresh B. Sadineni, Ahmad G. Abu Heiba, Robert F. Boehm, and Isaac Y. Mahderekal
Performance of the Amonix High Concentration Photovoltaic System at the NV Energy Clark Station, Aaron Sahm, Robert F. Boehm, Ken Stone, and Kelly Johnson
Optimization of Performance Specifications Based on Environmental Parameters, Aaron M. Sahm, Robert F. Boehm, and Kenneth W. Stone