Faculty research from the Mechanical Engineering department.
Submissions from 2008
Dynamic Strain Ageing of an Austenitic Superalloy: Temperature and Strain Rate Effects, Ajit K. Roy, Joydeep Pal, and Chandan K. Mukhopadhyay
Tensile Deformation of a Nickel-Base Alloy at Elevated Temperatures, Ajit K. Roy, Anand Venkatesh, and Vikram Marthandam
Residual Stress Measurements in Welded and Plastically Deformed Target Structural Materials, A K. Roy, Anand Venkatesh, and S. Dronavalli
Update to ANSI/ANS-6.4.3-1991 Gamma-Ray Buildup Factors for High-Z Engineering Materials (Part I), Lawrence P. Ruggieri and Charlotta Sanders
Spacing Analysis of an Inclined Solar Collector Field, S. B. Sadineni, Robert F. Boehm, and Rick A. Hurt
Theory and Experimental Investigation of a Weir-Type Inclined Solar Still, Suresh B. Sadineni, Rick A. Hurt, Christopher K. Halford, and Robert F. Boehm
Optimization of a Vehicle Space Frame Under Ballistic Impact Loading, Umakanth Sakaray, Mohamed B. Trabia, and Brendan J. O'Toole
Shielding Analysis of Yucca Mountain Aging Casks using MAVRIC, Steven P. Simmer and Charlotta E. Sanders
Simulation of Pulsed Neutron Source Reactivity Measurements and Calculation of Kinetic Parameters with MCNP, E. Y. Stankovskiy, C. C. Jammes, and Denis Beller
Simulation of the Neutron Source Created in the Target of Electron Accelerator using MCNP, E. Y. Stankovskiy, C. C. Jammes, and Denis E. Beller
Modeling of a Diffusion Controlling Oxidation Process with Scale Removal in Oxygen-Containing Liquid Flow, Taide Tan, Yi-tung Chen, and Huajun Chen
A Diffusion Controlling Duplex-Layer Oxidation Model with Scale Removal in Oxygen Containing Liquid Metal Flow, Taide Tan, Yitung Chen, and Huajun Chen
An Improved Mesoscopic Oxidation Model of Metals in Lead Bismuth Eutectic, Taide Tan, Yitung Chen, and Huajun Chen
Theoretical Modeling and Numerical Simulation of the Corrosion and Precipitation in Non-Isothermal Liquid Lead Alloy pipe/loop Systems, Taide Tan, Yitung Chen, and Huajun Chen
Natural Convection Induced Oxygen Transport in Liquid Lead Bismuth Eutectic, Taide Tan, Yitung Chen, and Xianfang Tan
Optimization of a Light-Weight Composite Blast Containment Vessel Structural Response, Jagadeep Thota, Ashok K. Ayyaswamy, Mohamed B. Trabia, and Brendan J. O'Toole
Optimization of a Military Vehicle Space Frame Subject to High Impact Loading, Jagadeep Thota, Mohamed B. Trabia, and Brendan J. O'Toole
Incorporating Rapid Prototyping Machine in Teaching Mechanical Engineering Design, Mohamed B. Trabia and Kevin Nelson
Finite Element Modeling of a Light-Weight Composite Blast Containment Vessel, Mohamed Trabia, Brendan O'Toole, Jagadeep Thota, and Kiran K. Matta
Generalized Design of an Anti-Swing Fuzzy Logic Controller for an Overhead Crane with Hoist, Mohamed Trabia, Jamil M. Renno, and Kamal A.F. Moustafa
Particle Attrition Analysis in a High Temperature Rotating Drum, B. R. Vijayarangan, Samir Moujaes, and M. Flores
Constructing 3-D wind fields for Nellis Dunes in Nevada, Xiuling Wang and Darrell W. Pepper
Numerical Simulation of Contaminant Dispersion Within an Aircraft Interior, Xiuling Wang and Darrell W. Pepper
Three-Dimensional Fluid Flow and Coupled Heat Transfer in Simplified Bipolar Plates, J. Wu, Jian H. Nie, and Y. Chen
Submissions from 2007
Evaluation of a Fuel Cell for Powering the Electrical Load of ICE Vehicles, Yahia Baghzouz, R. Hurt, and Robert F. Boehm