Faculty research from the Mechanical Engineering department.
Submissions from 2005
The Particle in-flight characteristics in plasma spraying process measured by phase doppler anemometry (PDA), Jian Ma, S. C.M. Yu, and H. W. Ng
Adaptive Servoregulation of a Projectile Fin Using Piezoelectric Actuator, Smitha Mani, Sahjendra N. Singh, Surya Kiran Parimi, and Woosoon Yim
Adaptive Control of a Projectile Fin Using Piezoelectric Elastic Beam, Smitha Mani, Sahjendra N. Singh, Surya Kiran Parimi, Woosoon Yim, and Mohamed B. Trabia
Direct adaptive control of a smart projectile fin by piezoelectric flexible beam actuator, Smitha Mani, Sahjendra N. Singh, Surya K. Parimi, Woosoon Yim, and Mohamed B. Trabia
Reliability Analysis of a Robotic Workcell for Transmuter Find Fabrication, Georg F. Mauer and Jamil M. Renno
An Evaluation of a Residential Energy Conserving HVAC System and a Residential Energy demand/management System, Samir F. Moujaes and Sachin S. Deshmukh
Stability Analysis and Control of Overhead Crane With Time-Dependent Flexible Cable, Kamal A.F. Moustafa, Mohamed Trabia, and Mohamed I.S. Ismail
Characterization of State-Change Reconfigurable Tooling Materials, K. Nelson, Brendan O'Toole, S. Raagas, Sarah Rahman, G. Calvert, and L. Clements
The Behavior of Ionic Polymer-Metal Composites in a Multi-Layer Configuration, Jason W. Paquette, Kwang J. Kim, Doyeon Kim, and Woosoon Yim
Heat Transfer Analysis of Nuclear Waste Casks Stored in the Yucca Mountain Repository, Darrell Pepper and Yi-tung Chen
Application of Meshless Methods for Thermal Analysis, Darrell Pepper and Bozidar Sarler
Inverse Dynamics Based Fuzzy Logic Controller for a Single-Link Flexible Manipulator, Jamil M. Renno
Evaluation of Antivibration Glove Test Protocols Associated with the Revision of ISO 10819, Douglas D. Reynolds and Eric Wolf
Residual Stress Measurements in Structural Materials by Nondestructive Technique, Ajit K. Roy, Subhra Bandyopadhyay, and Suresh B. Sadineni
Characterization of Residual Stresses in Structural Materials for Nuclear Applications, Ajit K. Roy, Subhra Bandyopadhyay, Silpa B. Suresh, and Douglas P. Wells
Environment-Assisted Cracking of Structural Materials Under Different Loading Conditions, Ajit K. Roy, Mohammad K. Hossain, and Ramprashad Prabhakaran
Characterization of Materials for Hydrogen Generation by HIx Decomposition, Ajit K. Roy, Ancila V. Kaiparambil, and Radhakrishnan Santhanakrishnan
Tensile Properties of Martensitic Stainless Steels at Elevated Temperatures, Ajit K. Roy, Srinivasarao R. Kukatla, Bhagath Yarlagadda, V. N. Potluri, Martin Lewis, and Brendan O'Toole
Tensile Properties and Corrosion Susceptibility of Alloy C-276 in S-I Environment, Ajit K. Roy and J. Pal
Characterization of Structural Materials for Nuclear Hydrogen Generation, Ajit K. Roy, Radhakrishnan Santhanakrishnan, and Ancila Kaiparambil
Metallurgical and Corrosion Characterization of Structural Materials for the Nuclear Hydrogen Initiative, Ajit K. Roy, Radhakrishnan Santhanakrishnan, Ancila Kaiparambil, Bunsen Wong, Gottfried Besenbruch, and Lloyd Brown
Mechanical Properties and Cracking Behavior of High-Temperature Heat-Exchanger Materials, Ajit K. Roy, Lalit Savalia, and Narendra Kothapalli
Residual Stress Characterization in Structural Materials by Destructive and Nondestructive Techniques, Ajit K. Roy, Anand Venkatesh, Vikram Marthandam, Satish Dronavalli, Douglas P. Wells, and Ronald Rogge
Metallurgical and Corrosion Study of Alloy 800H, Ajit K. Roy and V Virupaksha
Use of Alloy 800H as a Heat-Exchanger Material, Ajit K. Roy, Vinay Virupaksha, and Jagadesh Yelavarthi